Hydraulic Submersible Pumps

Griffin Hydraulic Driven Submersible Pumps

Griffin’s Hydraulic Driven Submersible Pumps are available in trash, axial flow and materials handling models. The pumps range from 4″ to 24″ with a variety of impeller designs. These pumps are designed for handling high volumes of water up to 20,000 gpm and head conditions up to 140 ft. The impellers can handle solids up to 3″. Some models may also be used for high pressure applications.

Griffin’s material handling pumps are designed to fit in standard manholes for sewer bypass operations and liquids with heavy trash and solids content. Griffin’s trash pumps are good for general pumping applications such as coffer cells or pumping lakes or ponds. Griffin’s axial flow pumps are excellent for high flow situations such as river bypass or dam repairs.

Submersible Pump Features

    • Models available include Trash Pumps, Axial Flow Pumps & Materials Handling Pumps
    • Stainless steel pumps handle caustic and leachates
    • Special 6” models designed to fit standard manholes
    • Designed to handle sludge, trash, raw sewage, clear liquid and industrial effluent
    • Pumps capable of up to 140 ft of head and up to 20,000 gpm

Estimate your flow rate requirement in gallons per minute

Standard Units

Size Model Solid Handling (in.) Max Capacity (GPM) Max Head (ft.)
4″ 4MH 3 455 59
4″ 4MHL 3 900 112
6″ 6MH 3 1500 80
6″ 6MHL 3 1800 119
6″ 6T 3 990 72
8″ 8T 3 1490 80
12″ 12T 3 5000 55
24″ 24AX 3 20000 35

Hydraulic Power Units

Griffin’s Hydraulic Power Units are available in five standard sizes; 250 Series, 400 Series, 600 Series, 800 Series and 825 Series. These units are self contained, portable, diesel-driven or electric-driven hydraulic power units. These units are capable of powering hydraulic submersible pumps or other hydraulic equipment.

Due to the ability to throttle the engine, a wide variety of hydraulic flow and pressure can be delivered. These Griffin units operate efficiently at a wide range of conditions. They can be positioned in remote locations without the need for electrical power and at distances of 150 feet or greater away from the pumphead itself.

Also, through the use of biodegradable hydraulic oils, these units are an environmentally friendly solution. Each unit is also equipped with a hydraulic relief valve to insure safe operation.

Hydralic Power Unit Features

  • Available in 5 standard Series
  • Self-contained, portable diesel-driven hydraulic power units
  • Capable of powering hydraulic submersible pumps or other hydraulic equipment
  • No need for electricity in remote areas
  • Operates efficiently at a wide range of conditions
  • Trailer mounted with fuel tank and diesel engines

Standard Units

Model Rated Hydraulic Flow (GPM @1200 rpm, 100psi) Standard Pumphead
250HPND 7 4MH, 6T
400HPND 28 4MHL, 6MH, 8T
600HPND 38 6MHL
800HPND 50 6MHL, 12T
825HPND 60 12T, 24AX